• Zebrafish Larvae Array 96 Well Plate
  • zebrafish feeds
  • Looking for Partners
  • AquaSystem
  • BreedingTanks
  • FDA
  • CRISPR/Cas9
  • TechBall
  • pH6
  • Zebrafish Larvae Array Plate
  • zebrafish feeds
  • Looking for Partners
  • ZebrafishHousingSystem
  • MatingBox-500x500
  • FDA-500x500
  • CRISPR/Cas9-500x500
  • pH6-500x500
  • TechBall-500x500

Water Detection devices

Conductivity controller:

Mining fine-controlled, digital display, monitors the water conductivity value, accurately showing the changes in salt water conditions, and monitoring of the correct salinity values, easy to use and reasonable price.

  • Range:-1999us ~ +199.9 mS
  • Resolution value: 1μS (2000μS) / 0.1mS (200.0mS)
  • Setting range: 0 ~ 1000μS / 0 ~ 100.0mS

Control Specifications:

  • AC240V/5A capacity Error value: (2% + 2 digits) / (23 C + 5 C)
  • Power indicator: 0.56 "LED, 3 1 / 2 digit
  • Power supply: AC 240V/50Hz Standard value reef habitat tanks: 51 ~ 57mS/cm


Redox controller:

Mining fine-controlled, digital display, can be connected to the ozone machine, automatic monitoring and accurate control of the water redox potential value, easy to use and reasonable price.

  • Range:-1999mV ~ +1999 mV
  • Resolution value: 1 mV Range:-500mV ~ +500 mV

Control Specifications:

  • AC240V/5A capacity Degree of error values: 0.01 mV
  • Power indicator: 0.56 "LED, 3 1 / 2 digit
  • Temperature range: 0 ~ 50 ℃
  • Power supply: AC 240V/50Hz


Standard value reef habitat tanks: 350 ~ 450 mV pH controller:

Mining fine-controlled, digital display, can be connected to CO2 supply system, automatic monitoring and accurate control of water pH, easy to use and reasonable price.

  • Measuring range: pH 0 ~ pH 14
  • Resolution values: pH 0.01
  • Range: pH 3.5 ~ 10.5 Control

Specifications:

  • AC240V/5A capacity
  • Degree of error values: 0.01 pH
  • Power indicator: 4.56 "LED, 3 1 / 2 digit
  • Temperature range: 0 ~ 50 ℃
  • Power supply: AC 240V/50Hz

 

Standard value: aquatic habitat tanks pH6.8, pH8.2 reef habitat tanks pH pen:

Special design single-point calibration, calibration quickly indeed. Large liquid crystal display, clear easy to observe. Telescopic rod electrode sensor, to follow the situation can adjust, easy to use. Electronic components using SMT adhesive, low failure rate. 9V square battery, long life. Fine plastic case, carry or store are appropriate.

  • Test range: 0 ~ 14.0 pH
  • Resolution: 0.1 pH
  • Accuracy: ± 0.2 pH
  • Use temperature: 0 ~ 50 ℃
  • Power: DC 9V
  • Size: 158 × 40 × 34 mm
  • Weight (with battery): 120 g

Applicable to fresh water tank, a planted tank, sea water tanks, reef tanks and pondsOxygen is necessary for life respiration. The amount of dissolved oxygen in the water called the dissolved oxygen. Dissolved oxygen in the aquarium should always remain at 5mg/L or more. If the aquatic life lack oxygen resulting in death. Must regularly monitor the water dissolved oxygen, the circulatory system and the encourage the use of filtering devices in a safe range.